Indirect Determination of Sulfide by Cold Vapor Atomic Absorption Spectrometry

A method for the determination of sulfide based on its interference with the determination of Hg by cold vapor atomic absorption spectrometry is described. The decrease in mercury absorbance at 253.7nm is proportional to the concentration of sulfide over the range of 10–320ngmL^–1. The limit of detection was found to be 7ngmL^–1 and the relative standard deviation (R.S.D.) for the determination of different concentrations of sulfide was in the range of 1.8–2.2%. This method was applied to the determination of sulfide in whole human blood after gas-phase separation.     

Syntheses of 1-substituted 1,2,4-triazoles,imidazoles and benzimidazoles

Substituted 2-phenethyl-1,2,4-triazoles, 1-phenethylimidazoles 3 and 1-phenethylbenzimidazoles 5 were synthesized from the reaction of compound 8 with tri-n-butyltin hydride in good yield. The reaction of substituted-2-phenethyl halide with 1H-1,2,4-triazoles, imidazoles and benzimidazoles gave a low yield. The yield was increased by the use of substituted-2-phenethyl p-toluensulfonate.     

Substituted 1,2-Thiazetidine 1,1-Dioxides. Synthesis of (<Emphasis Type="Italic">RS</Emphasis>)- and (<Emphasis Type="Italic">S</Emphasis>)-1,2-Thiazetidine-3-acetic Acid 1,1-Dioxide and its Reactions with Amino Acids and Dipeptides

Summary. (RS)-2-tert-Butyldimethylsilyl-1,2-thiazetidine-3-acetic acid 1,1-dioxide prepared from (RS)-S-benzyl--homocysteine was condensed via DCC/NHS with various L-amino acid esters or dipeptide esters yielding N-silylated -sultam peptides. A -sultam active ester was isolated as an intermediate. Desilylation with TBAF in THF yielded stable N-unsubstituted products, and deprotection of the benzyl esters was achieved by catalytic hydrogenation. (S)-S-Benzyl--homocysteine was obtained by fractional crystallization of the brucine salt of the racemate and transformed into benzyl (S)-1,2-thiazetidine-3-acetate, which was on the other hand synthesized by an enantiospecific route from -benzyl Boc-L-aspartate. Some -sultam peptides were prepared from the (S)-enantiomer, and finally some -sultam peptides containing D-Ala units were obtained.     

Radiochemical separation of99Mo from natural uranium irradiated with thermal neutrons

⁹⁹Mo was separated from uranium and insoluble fission product hydroxides. More than 98% of⁹⁹Mo radioactivity was extracted with bis (2-ethylhexyl)phosphoric acid. The organic phase was washed and⁹⁹Mo was back-extracted from the organic phase with NH₄OH solution. The percent recovery from the organic phase was 91% and the purity of⁹⁹Mo was more than 99%. Pure^99mTc was also extracted from the organic phase with a saline solution. Reversed-phase partition chromatography was used for the purification of⁹⁹Mo from¹³¹I and other fission products (10% HDEHP on kieselguhr bed).¹³¹I and other isotopes were quantitatively eluted with 0.1M H₂SO₄,⁹⁹Mo was eluted using a mixture of 0.5 M HCl and 30% H₂O₂.     

Thermoanalytical study of linkage isomerism in coordination compounds: Part I. Reinvestigation of thermodynamic and thermokinetic of solid state interconversion of nitrito (ONO) and nitro (NO2) isomers of pentaaminecobalt(III) chloride by means of DSC

Solid state thermal isomerization of [Co(NH₃)₅(ONO)]Cl₂ (nitrito isomer) to [Co(NH₃)₅(NO₂)]Cl₂ (nitro isomer) and reverse reaction were investigated by non-isothermal differential scanning calorimetry (DSC) and found to be essentially an equilibrium process. The interconversions are accelerated at above 65 °C and reach to equilibrium state at about 155 °C. After establishment of the equilibrium the relative amounts of two isomers at any temperature are governed by Gibbs free energy relationship. The experimental enthalpy changes of isomerization of pure nitrito and nitro solid samples to the equilibrium state are −4.67 (±0.19) and 0.99 (±0.05) kJ mol⁻¹, respectively. From these values, total enthalpy change was calculated as: ΔH°=−5.66(±0.20) kJ mol⁻¹. Using Gibbs free energy relationship, equilibrium constant, total free energy and entropy changes were estimated at 60 °C as: K=7.72(±0.8),  kJ mol⁻¹ and  J K⁻¹ mol⁻¹.An initial rate method has been developed to determine the kinetic parameters of these reactions from non-isothermal DSC data. Both nitro to nitrito and reverse reactions obey first order kinetic law in solid state. Estimated activation parameters of forward and reverse paths at 60 °C are , , and , respectively. The negative activation entropy of both directions support the intramolecular mechanism of isomerization, including formation of a seven coordinate transition state, which formerly suggested based on spectral and X-ray methods.     

Spectrophotometric determination of beryllium in water samples after micelle-mediated extraction preconcentration

A new micelle-mediated phase preconcentration method for preconcentration of ultra-trace quantities of beryllium as a prior step to its determination by spectrophotometry has been developed. Chrome Azurol S (CAS) and cetyltrimethylammonium bromide (CTAB) were used as chelating agent and cationic surfactant, respectively. The method evaluates and eliminates the blank bias error present in such procedures using mean centering of ratio spectra. This procedure gives more accurate results than the traditional approach using absorbance values against reagent blank. The optimal extraction and reaction conditions were studied and the analytical characteristics of the method (e.g., limit of detection, linear range, preconcentration and improvement factors) were obtained. Linearity was obeyed in the range of 0.9-18.0 ng mL⁻¹ (1.00 × 10⁻⁷-2.00 × 10⁻⁶ mol L⁻¹) of beryllium. The detection limit of the method is 0.51 ng mL⁻¹ (5.66 × 10⁻⁸ mol L⁻¹) of beryllium. The interference effect of some anions and cations was also tested. The method was applied to the determination of beryllium in spring water samples.     

Structural characterization of nickel oxide nanowires by X-ray absorption near-edge structure spectroscopy

Nickel oxide nanowires modified by poly(vinylpyrrolidone) (PVP) were synthesized via a simple chemical pattern. For the first time NiO nanowires with diameters ranging from 40 to 100 nm with the expected ratio (length vs diameter) ranging from 54 to 90 were grown using a simple solution-phase approach (mild method). These nickel nanowires exhibited unique photoluminescence features and displayed a significant UV luminescence. X-ray absorption near-edge spectroscopy has been used to characterize the local Ni environment and identify the electronic structure. Comparing experimental and theoretical spectra at the Ni and O K edges, we determine the lattice distortion via the analysis of the characteristic preedge features and the multiple-scattering structures detected in the X-ray absorption near-edge structure spectra. The correlation between experimental features and the disordered or distorted local structures is also discussed.     

Simultaneous kinetic spectrophotometric determination of cyanide and thiocyanate using the partial least squares (PLS) regression

The partial least squares (PLS-1) calibration model based on spectrophotometric measurement, for the simultaneous determination of CN⁻ and SCN⁻ ions is described. The method is based on the difference in the rate of the reaction between CN⁻ and SCN⁻ ions with chloramine-T in a pH 4.0 buffer solution and at 30 °C. The produced cyanogen chloride (CNCl) reacts with pyridine and the product condenses with barbituric acid and forms a final colored product. The absorption kinetic profiles of the solutions were monitored by measuring absorbance at 578 nm in the time range 20-180 s after initiation of the reaction with 2 s intervals. The experimental calibration matrix for partial least squares (PLS-1) calibration was designed with 31 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 10.0-900.0 and 50.0-1200.0 ng mL⁻¹ for CN⁻ and SCN⁻ ions, respectively. The proposed method was successfully applied to the simultaneous determination of cyanide and thiocyanate in water samples.     

Installation of carbon chain onto 2-cyclohexene-1,4-diol monoacetate

Alkylation of cyclohexenyl monoacetate 1 with R₂Cu(CN)(MgCl)₂ or RMgBr/CuCN (cat.) in Et₂O produced trans 1,2-isomers 4, while arylation and alkenylation of 1 was accomplished with lithium borates 5 and a nickel cat. to afford trans 1,4-isomers 3 selectively. Furthermore, several transformations of the products were carried out to demonstrate synthetic advantages of the present reactions.     

Commercially available 5'-DMT phosphoramidites as reagents for the synthesis of vinylphosphonate-linked oligonucleic acids

[reaction: see text]. Commercially available cyanoethyl phosphoramidites derived from T, d(C), d(A), and d(G) were hydrolyzed (1H-tetrazole, MeCN/H2O) to give the corresponding H-phosphonates in excellent yields. Palladium(0)-catalyzed cross-coupling of each of these with the thymidine-derived vinylbromide 2 afforded the corresponding vinylphosphonate-linked dimers TT, d(C)T, d(A)T, and d(G)T in modest to good yields. The TT dimer was further elaborated to give a 5'-DMT-TT-3'-CEP building block, and this was used in the automated synthesis of the TpTTpT tetramer.